Если диск перестал работать, то приходит сообщение такого вида:

Toliau pateikiamos intervencijos detalės:
Diagnosis interface boot (rescue)
Date 2017-05-13 17:46:20, shawn M made Diagnosis interface boot (rescue):
 Here are the details of the operation performed:
The server gets stuck during the boot phase, with the message:
(remote media not found)

The hard drive with S/N : S1YFNXAG804274 is currently defective and requires a replacement. Please contact customer support to have it replaced.

Информация о диске показывает вот такое:

smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.14.77-mod-std-ipv6-64-rescue] (local build)
Copyright © 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG MZ7LM240HCGR-00003
Serial Number:    S1YFNXAG804274
LU WWN Device Id: 5 002538 c4004b5a5
Firmware Version: ERRORMOD
User Capacity:    1,006,260,224 bytes [1.00 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun May 14 10:09:09 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Read SMART Data failed: scsi error aborted command

=== START OF READ SMART DATA SECTION ===
SMART Status command failed
Please get assistance from http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
 ERR=0x00, SC=0x00, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0x50
SMART Status not supported: Invalid ATA output register values
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed: scsi error aborted command

Read SMART Error Log failed: scsi error aborted command

Read SMART Self-test Log failed: scsi error aborted command

Selective Self-tests/Logging not supported

Надо писать в саппорт инцидентов, кидать лог smart и ждать. Или просто заказать новый, а старый не продлевать.